Bottom Up Blinds

Revealing a unique and pleasing style, bottom up blinds New York are not an ordinary window treatment. Unlike any other blinds, bottom up blinds or bottom up shades are pulled up from the bottom. The lower part is concealed first and the upper part can be remained open to allow the light to come into the room. Blinds of this type are basically designed to give privacy rather than to stop the light, as usual blinds do.

Roman blinds New York, or roman shades, are a typical example of bottom up blinds. With clean and sophisticated lines, these blinds are usually made of the same fine drapery fabrics and related quality materials, and equipped with superior control systems and headrails to make installation and operation better and easier. In addition, people usually purchase these blinds to emphasize luxury, elegance and classic. Roman blinds give more unusual and distinctive look if paired with pelmet or valances.

Bottom-up shades New York geared with tension hardware systems allow different applications. It can be installed in vertical, sloped, or even horizontal. The control system of these blinds type automatically adjusts to keep the fabric taut during fabric expansion and contraction. It also allows a single motor to both extend and retract a shade.

The distinctive bottom-up blinds are more practical if applied outside the window recess where there is a narrow window sill. One must use fixing wires placed at the sides of the window frame to keep the blind against the window and make them less conspicuous. You may use net wires as this is the cheapest and simplest way but for a more elegant solution brass poles or cafe rods could be used but would need fixing brackets of some description. Pleats will fall below the bottom edge of the blind when the blind is lowered or opened. The pleats will lay on the window sill if fitted inside the window recess and could get damp if used in a kitchen or bathroom